There Are Several Reasons For The Poor Heat Dissipation Of Diesel Generator Sets

Jul 24, 2024

Leave a message

Regarding several reasons for the poor heat dissipation of diesel generator sets, I hope that the following content introduction can help you.
1. The radiator fins are infarcted or damaged.

The cooling fan does not work or the heat sink is infarcted, so that the coolant temperature cannot be lowered, the heat sink is rusted, and the phenomenon of leakage is formed, and poor circulation can also be formed.
2. Thermostat fault.
The generator extinguishing chamber is equipped with a thermostat, the purpose is to control the temperature of the generator extinguishing room, the thermostat must be completely turned over at the regular temperature (82 degrees) to help small circulation, if there is no thermostat, the coolant can not adhere to the circulating temperature, may produce a low temperature alarm.
3. The coolant liquid of the generator set is too low or does not conform to the rules.
If the liquid noodle is too low, the coolant temperature can be directly formed so that the coolant does not circulate, and the coolant is 50% antifreeze and 50% softened water according to the rules, if it does not conform to the rules, it will form a pipeline infarction, and rust will occur in the pipe wall, so that the coolant can not circulate normally.
4. Pump fault.
Check whether the pump can work well, if it is found that the pump transmission gear shaft is worn too much, it means that the pump has not played a role, and the dry cycle is normal after the demand is replaced.
5. Exhaust system fault.
There is air mixed in the cooling system of the generator set, the pipeline is not smooth, and the suction valve and exhaust valve on the shrinkage tank are damaged and directly affect the circulation, at this time, the pressure value should be checked frequently to see if they can fit the rules, the suction pressure is 10kpa, the exhaust pressure is 40kpa, and whether the exhaust pipeline can be unblocked is also an important reason for affecting the circulation